BOLL & KIRCH 5/2-Way Solenoid Valve Overhaul Kit
Friday, 15th December 2017
A 5/2 way directional valve from the name itself has 5 ports equally spaced and 2 flow positions. It can be used to isolate and simultaneously bypass a passage way for the fluid which for example should retract or extend a double-acting cylinder. There are variety of ways to have this valve actuated. A solenoid valve is commonly used, a lever can manually twist or pinch to actuate the valve, an internal or external hydraulic or pneumatic pilot to move the shaft inside, sometimes with a spring return on the other end so it will go back to its original position when pressure has gone, or a combination of any of those mentioned above.
This is the first video in the, BOLLFILTER UK Spares Department "How to" series of repair and service help films. This one shows operators a low-cost method to overhaul the 5/2-Way Solenoid Valve, a standard spare part present in the BOLL & KIRCH Filter Range.
BOLLFILTER UK are the only approved BOLL & KIRCH supplier in the UK & Ireland. A lower cost way to replace the 5/2-Way Solenoid Valve found in the complete BOLL & KIRCH Filter Range. Purchase our Overhaul Kit and save over 40% on the cost of a new unit.
BOLLFILTER UK have been the UK and Ireland exclusive sales office, stockist and distributor for BOLL & KIRCH filtration products for over 2 decades and hold stocks of marine and industrial spare parts at their UK premises for immediate dispatch.
For more information and supply of spare parts please contact the BOLLFILTER UK Filters team. Contact details below;
BOLLFILTER UK Limited
Tel: +44 (0)1621 862180
Email: filters8@bollfilter.co.uk
Website: https://www.bollfilter.com/uk
