SubSalve USA Schwer Marine Fittings Hystat Hydraulic Cylinder Manufacturers BP Norse Marine Southbay Marine Services

Manuplas® supply bespoke five-piece sprayed bow fender system

Thursday, 1st October 2020

The challenge

Our customer, based in Singapore, contacted us when they needed a bow fender solution for one of their oil and gas crew boats delivered and fitted in a very short timeframe. In addition to the short timeframe, the solution had to be impact resistant to protect the vessel and marine structures and cost-effective.   

Our solution

The Manuplas marine team designed, manufactured and installed a five piece sprayed bow fender system; the modular approach and design of our bow fenders offers flexibility on the shape, size and technical specification of fendering solution supplied and enabled us to provide a solution without the need to invest in costly and time-consuming mould tooling.

Designed to offer optimum impact absorption and grip, this type of fender is supplied and installed in five sections:

  • One forward (middle) bow section
  • Two side sections 
  • Two aft side sections

These are manufactured from a high-performance, cross-linked polyethylene foam core, and coated in a highly-abrasion-resistant polyurethane elastomer skin, which is reinforced with two layers of Kevlar to increase the tear resistance of the fender. The fendering is held in place with adhesive and straps.  The middle bow fender section has a non-slip finish to increase crew safety when the vessel is used to board structures.

Compared to traditional rubber ‘D’ fendering solutions, Manuplas® bow fenders are up to 60% lighter, improving the speed and efficiency of vessels. The highly-absorbent and abrasion-resistant material is virtually non-marking and can withstand the harsh, offshore environments in which search and rescue and wind farm vessels commonly operate. 

Pull out quote 

Manuplas® have been with us every step of the way, from our initial point of contact, through to ensuring rapid supply and delivery of the fender sets which met the time frame. Their systems offer the ultimate solution for shipbuilder, owner and operator alike and, because they provide a modular approach, their fenders are easy to install and replace as required.”

Liferafts International DiveCo Marine Civils Sealane Maritime Engineering
SubSalve USA Schwer Marine Fittings Hystat Hydraulic Cylinder Manufacturers BP Norse Marine Southbay Marine Services

Jenkins Marine Commission Manor Marine for ‘Nab’ and ‘Needles’ Upgrades

Thursday, 1st October 2020

Jenkins Marine has commissioned Manor Marine to manufacture and install two new wheelhouse and accommodation modules for the Split Hopper Barges, ‘Nab’ and ‘Needles’. 

The superstructures will be manufactured in Portland over the coming months, with an aim to complete the project by Summer 2021.

Each superstructure will feature two separate air-conditioned double cabins, a mess/briefing room, drying locker and an elevated bridge with ergonomic helm console and all-round visibility; the new modules will provide much-needed improvements to the size and quality of welfare facilities onboard the vessels, whilst modernising their appearance.
Director at Jenkins Marine, Daniel Jenkins, said “The forthcoming works represent a substantial investment by Jenkins Marine to update some of our core vessel assets. We are pleased to be able to continue our strong working relationship with Manor Marine and support the ship repair industry in the South of England, and essential service for vessel operators like Jenkins Marine.”

Managing Director at Manor Marine, Leif Cooper, commented “We are extremely pleased to be working with Jenkins Marine again, especially on their vessels modification project and realise their impressive new design; this opportunity further cements the relationship between the two companies.”

The new wheelhouse and accommodation modules will be ready for installation for Jenkins Marine following the conclusion of their annual maintenance dredging programme.
 

Liferafts International DiveCo Marine Civils Sealane Maritime Engineering
SubSalve USA Schwer Marine Fittings Hystat Hydraulic Cylinder Manufacturers BP Norse Marine Southbay Marine Services

Substantial investment into new site announced by Kloeckner Metals UK

Tuesday, 29th September 2020

Kloeckner Metals UK is pleased to announce they have completed the purchase of a site in Thurrock, Essex to develop a new state of the art facility.  

Part of the global Klöckner & Co Group, Kloeckner Metals UK boasts 14 business units across the UK and is one of the leading multi-metals processing suppliers in the UK.

The substantial investment into the new site was needed to support the relocation of the existing site at Thames Wharf, London, which, over the years, became too small for the business’ needs. Conveniently located adjacent to the M25, the new site is expected to be operational during the fourth quarter of 2021. Once completed, the new site will create more than 110K square feet of internal space, including newly built offices, state of the art processing equipment, and the latest digital logistics & operations technologies.

Peter Whiting, CEO of Kloeckner Metals UK: “This new investment is an important milestone in Kloeckner’s strategic plan to establish ourselves as one of the leading supply chain partners in the UK. It is a truly exciting time for us as we continue to expand our business both through value added products & processing services and implementation of digital technologies. 

The new site, and its state-of-the-art equipment, will significantly increase our capabilities and allow us to deliver our mission of ‘getting you the products and services you need when you need them.’”
 

Liferafts International DiveCo Marine Civils Sealane Maritime Engineering
SubSalve USA Schwer Marine Fittings Hystat Hydraulic Cylinder Manufacturers BP Norse Marine Southbay Marine Services

Advanced Insulation strengthens Subsea growth opportunities with Bardot acquisition

Monday, 28th September 2020

Already a leading provider of subsea products, Advanced Insulation is strengthening their Subsea division with the acquisition of Bardot, a French-based specialist who engineer and design all S.U.R.F functions based on polymers, syntactic or steel technologies. 

As part of the acquisition, a new company, AIS Bardot has been created.  They will operate independently but collaborate with Advanced Insulation to bring a wider range of products to both company’s customers.  

To facilitate this, Greg Hue, currently Global Sales Manager, will become country manager for France.  In his new role, Greg will continue to lead sales for AIS marine division (Manuplas®) whilst integrating AIS Bardot product range and solutions into the portfolio.  Greg Hue commented; “Our combined strengths will help customers, achieve cost efficiencies and have access to a broader range of products and solutions”. 

This acquisition comes just weeks after Advanced Insulation announced the expansion into a new unit in Gloucester to meet increasing demand for their subsea product range. 

Andrew Bennion, Group Managing Director, commented: ““This acquisition perfectly aligns with our growth strategy and meets criteria that we have already set out including: technology that complements our existing business, strong customer base and the ability to leverage our effective operating model.        

He continued: “While Covid-19 has created some unexpected challenges, we are confident that our agility and continued investment in research and development will deliver continued growth.”

The Bardot Group is well known as a designer and manufacturer of polyurethane moulded products including bend restrictors and bend stiffeners.  They have developed a range of additional solutions (e.g. subsea buoyancy, water intake risers, ballast systems, clamps etc.) to support the oil and gas and renewables sectors which complements and extends Advanced Insulation’s current product range.

Liferafts International DiveCo Marine Civils Sealane Maritime Engineering
SubSalve USA Schwer Marine Fittings Hystat Hydraulic Cylinder Manufacturers BP Norse Marine Southbay Marine Services

Film-Ocean expands its fleet of ROV with further investment

Thursday, 24th September 2020

UK ROV services company, Film-Ocean Ltd, continues to expand its ROV fleet with the addition of a further Quasar 150HP Workclass ROV system.  This significant investment is part of Film-Ocean's fleet expansion strategy, which has seen four ROV systems added to the fleet over the past 12 months.   
 
Working at depths of up to 3000m Film-Ocean's Quasar 150HP Workclass ROV, a medium-sized high-power ROV, is well-suited for surveying, IRM, drill support and construction tasks; it's an all-rounder and the backbone of Film-Ocean's ROV fleet. The Quasar ROV is fitted with the latest technologies used for a broad range of operations.  
 
Film-Ocean's Quasar systems are both currently deployed in the North Sea and the Aegean Sea, supporting an electrical interconnection cable installation project. 
 
Scott Jenney, Film-Ocean CEO reported: "The additional Quasar ROV system is the latest in a series of planned developments within the business and an excellent addition to the fleet. We continue to see a high level of enquiries for this type of ROV system and this investment allows us to provide the additional capacity that our customers require.”  
 
Scott Jenney, Film-Ocean CEO, continues: "The latest strategic investment will equip Film-Ocean to continue with our development plans both domestic and international."  

Liferafts International DiveCo Marine Civils Sealane Maritime Engineering
SubSalve USA Schwer Marine Fittings Hystat Hydraulic Cylinder Manufacturers BP Norse Marine Southbay Marine Services

When Will We Monitor our Gaseous Extinguishing Systems Properly ?

Tuesday, 22nd September 2020

Abstract 

In this article the Chairman of a a high-exporting UK manufacturer in the Fire Sector asks why people and property remain at risk because they do not monitor the gaseous fire extinguishing systems that protect them.

In July 2020, at the height of COVID19 in the USA, the USS Richard Bonhomme, an amphibious aircraft carrier, developed a 5-day fire during a maintenance interval. It injured 68 military and civil personnel. It also made “out of service” a core strategic amphibious asset of the US Navy. It was one of only four ships in the US Pacific Fleet able to handle the F-35B 5th generation aircraft.  "As tensions mount with China in the South China Sea, as well as with North Korea, the loss of this ship and her capabilities will make it more difficult for the Navy to meet all its war-fighting requirements," said John Kirby, a CNN military analyst and former US Navy Admiral.

The top US Navy acquisitions official said, "Anyone who steps aboard our ships must be ever vigilant about ensuring fire safety. I urge you to use the recent fire to ensure that our work spaces are clean, that unnecessary clutter is removed, that all fire safety measures are being followed and that there is unrestricted access to firefighting and damage control equipment." Excellent, you may think. Regardless of the reason for the fire itself, a reason that the fire became uncontrolled … was because its fire suppression system had been shutdown and its compartment doors left open. For maintenance.

For a gaseous extinguishing system to function, whether liquefied, such as CO2, NOVEC™ 1230 or FM-200™ or non-liquefied, such as Nitrogen or Inergen, one needs two things: Firstly, sufficient contents to generate the design concentration required to extinguish the fire event, and secondly, compartmentation integrity, so that the extinguishing gas is contained within the space on actuation. Without either, the fire event risks escalation.

So how can one test that either exists ? To cater for the contents, one can shut the system down, dismantle it, and weigh each cylinder of extinguishing gas. Then re-instal each of them. There can 600 45KG cylinders on a commercial ship, 100 on an offshore platform. Hundreds in a Data Centre. It takes 2 licensed fire technicians people 15 minutes to do this, per cylinder. On a good day. For the compartmentation integrity, one can pressurise the compartment space, either by air or water, and see where it leaks out. Neither works when the fire technicians are away from the asset for the other 364 days per annum. 

This is how our industry has worked since gaseous systems were first developed. In 1924 the Walter Kidde Company developed the first CO2 extinguisher and in the 1960’s DuPont developed the first Halon system. In the 1990’s DuPont developed FM-200™ and 3M™ NOVEC™1230 as  “clean agents” to replace Halon, banned under the Montrael Protocol. After that came the use of natural un-liquefied gases. We know them today as Inergen™. What unites all of them is that they are highly pressurised. Some of them up to 300 Bar, or over 4,350 PSI. And anything that is pressurised can leak. Hence the reason why BS EN ISO 14520 was developed – to check that their contents had to be checked, and checked for content loss. If they lost more than 5% the cylinder had to be re-filled.

So our industry sensibly knows that anything that is pressurised can leak. That is science. Perfect physical principles. The mathematics are clear. Do you know a mathemetician or a physicist in our industry ?

The same with compartmentation. Like any ship the USS Richard Bonhomme is constructed to withstand damage. Since the principal reasons for ships loss at sea remains sinking and fire, all ships, offshore oil & gas platforms, even offshore wind turbines, understand the need for “compartmentation”. Below the waterline they are known as watertight compartment doors, and the areas between the watertight bulkheads, containing the electrical cabling that pass through every marine structure at sea, are called Cable Transit Areas, and they are designed to maintain compartmentation integrity. Not just to prevent water ingress and sinking, but to stop fire passing between the compartments too.

One way to test them is to fill them with water and to learn at what “head of water” the bulkhead collapses, or the watertight compartment door, bursts. But it is not very practical. Another is to pressurise the compartment by positive pressure and see where it leaks. All grand … on a cool calm day when no-one is inside the ship. Even better in a lab.

But here we are in our industry using gases for fire systems that are nearly 100, 60 and 30 years old, and we still test them inadequately. It is as if there has been no technological advance in any field other than our own.  And the accidents keep coming. The fires keep hurting and destroying and our regulations gently modify themselves, all at a time of some of the highest-paced technological change the world has ever seen.

A dairy farmer does not check a pregnant herd by weighing them. A bat does not fly through a forest at night by sight. A whale does not communicate hundreds of miles by using morse code. Submarines rarely see their adversaries or even the sea that they glide through. The blind “see” by hearing sound and in 4 of the above examples, it is the use of sound beyond our audible range that enables them to “hear the [ultrasonic] sounds that others cannot hear”.

A cylinder containing a Clean Agent is in itself acoustic. Like a bell. A compartment is a room. Unless it is an anechoic chamber designed to completely absorb reflections of either sound or electromagnetic waves, it reflects them. And its leak sites let them pass through.

So just as a vet, a bat, a whale or a submarine sonar, uses ultrasound to “see the sounds that others cannot hear”, so can our fire industry use ultrasound to test both the contents of its gaseous extinguishing systems and the compartmentation integrity of the spaces that they are meant to be “held” in.

All we need are the mathematics. Mathematics is the language of the universe. It expresses the physical principles that enable it. And it can be at the heart of our industry too. It already is by some of you reading this article.

At Coltraco Ultrasonics we share a British legacy in ultrasound that began in 1916 when the Admiralty used it to hunt enemy submarines. It is 104 years since we have had it. It has taken over 80 years for the fire industry to use it in the portable and constant monitoring of gaseous extinguishing systems, and the compartment spaces into which they actuate and protect.

To those of you who use it, I salute you.

Liferafts International DiveCo Marine Civils Sealane Maritime Engineering
SubSalve USA Schwer Marine Fittings Hystat Hydraulic Cylinder Manufacturers BP Norse Marine Southbay Marine Services

Marine Services (SW) Ltd has added a new multi-purpose workboat to its fleet

Thursday, 17th September 2020

Shamrock is a Damen Pushy Cat 14.5 metre workboat, coded under  MCA Workboat registry, Category 2 up to 12 passengers.  She can be used as a survey vessel, dive support operations and general port towage, she has also been adapted for plough/dredging work. 

This vessel will supplement our existing marine plant which includes barges, landing craft, various safety boats/small workboats, Unifloat modular pontoon systems, and a general-purpose, self-propelled, spud legged work barge fitted with an on-board deck crane.

We are based at Yacht Haven Quay, Plymouth and have extensive waterfront workshops providing easy loading and unloading alongside, giving direct access to the Port of Plymouth, Devonport Dockyard and the South Coast.  Our in house workshops offer, welding, fabricating and specialist engineering support for marine civil engineering projects large and small. 

Services include
Full in house commercial dive team
Specialized dredging projects.
Workboat and marine plant hire
Dockside works including jetty repairs / fendering etc
Design and fabrication
Full engineering support 

For further information please see our website www.marineservicessw.co.uk
 

Liferafts International DiveCo Marine Civils Sealane Maritime Engineering
SubSalve USA Schwer Marine Fittings Hystat Hydraulic Cylinder Manufacturers BP Norse Marine Southbay Marine Services

All-Energy & Dcarbonise Postponed until 12-13 May 2021

Thursday, 17th September 2020

Reed Exhibitions Limited has announced that All-Energy, the UK’s largest annual renewable and low carbon energy exhibition and conference, and the co-located Dcarbonise, are now scheduled to take place on Wednesday 12 – Thursday 13 May 2021 at the Scottish Event Campus (SEC). This follows the announcement by SEC that NHS Louisa Jordan will continue to be in place at the venue until 30 April 2021.

As SEC explained: 

“The SEC has now concluded a licence extension with the Scottish Government to extend the tenancy period for NHS Louisa Jordan until 30 April. The extension accommodates an appropriate decommissioning period which allows full reinstatement to be made to the venue followed by a thorough clean. SEC will be back as a fully operational event venue from 1 May 2021.”

Peter Bloor, All-Energy and Dcarbonise Event Director of Reed Exhibitions, said:

“Naturally, without access to SEC we are unable to hold All-Energy and Dcarbonise in November and we have therefore postponed the duo of events until May 2021 after having consulted our exhibitors and key stakeholders. NHS Louisa Jordan is doing fantastic work both as a centre for outpatients and as a training facility.

“We believe that postponing the show until May, six months before COP26, the UN’s Climate Change Summit (also at SEC), will enable us to deliver the true value of this industry-leading event. 

“We will be marking the show’s November 2020 dates by holding the first ever ‘All-Energy / Dcarbonise 2020 Virtual Summit’, an event which has the support of the Scottish Government.

“This is in addition to the monthly series of free webinars we have been hosting since May 2020, a programme that has now attracted 10,322 registrations for 13 webinars across a broad range of topics. This has resulted in over 6,500 unique viewers ‘on the day’ or using the ‘on-demand’ service. 

“We are delighted by this level of interest and uptake, and thank our chairs, panellists and sponsors for their contributions and enthusiastic support. We have already reached the equivalent commitment in numbers to our usual face-to-face event; and that will be surpassed by the remaining webinars from September onwards (not forgetting the inaugural Summit too).

“Naturally, in the ‘new normal’ the health and safety of our exhibitors, speakers, visitors, and staff will remain our number one priority and we will stage next May’s show with their health and safety very much in mind. Reed Exhibitions has developed a formal set of enhanced health and safety protocols in collaboration with industry task forces for our future events. (This is available at https://www.reedexhibitions.com/files/Reed-Exhibitions-New-Normal-June-2020.pdf). 

“We would like to thank our exhibitors, speakers, partners, suppliers, visitors and of course the SEC for their continuing support during this challenging time.”

2021 Conference Call for Papers now published
With an eye on the next physical event on 12 and 13 May 2021 the Call for Papers has been published and is available at https://www.all-energy.co.uk/en/Conference/callforpapers 

Sponsors, supporters, and further information 
All-Energy’s major sponsors include ScottishPower (Host Sponsor); Shepherd and Wedderburn (Headline Sponsor) and Natural Power (Power Club sponsor) and is held in association with the Renewable Energy Association; Highlands and Islands Enterprise; Scottish Enterprise; UKRI and Innovate UK; Sustainable Glasgow; and the Aberdeen Renewable Energy Group (AREG), with Glasgow as its Host City, and the Society for Underwater Technology as Learned Society Patron. Dcarbonise is sponsored by the Scottish Government, Energy Saving Trust and Zero Waste Scotland. 

The Smart Urban Mobility Solutions conference stream (part of Dcarbonise) is supported by Transport Scotland and organised in association with the Smart Environment Forum of ITS United Kingdom

Further information and visitor registration is at www.all-energy.co.uk and www.dcarbonise.com

Liferafts International DiveCo Marine Civils Sealane Maritime Engineering
SubSalve USA Schwer Marine Fittings Hystat Hydraulic Cylinder Manufacturers BP Norse Marine Southbay Marine Services

Star International launches unmanned piracy detection vessel

Thursday, 17th September 2020

  • The Narwhal Star Unmanned Surface Vessel (USV) is designed to identify piracy threats and inform evasive actions 
  • The USV improves safety for passengers and crew, whilst safeguarding vessels, cargo and other valuable assets 
  • The USV is piloted via a remote command centre and is equipped with a payload specifically developed for surveillance missions

Star International, worldwide supplier to the offshore and marine industries, has launched a new Unmanned Surface Vessel (USV) that has been designed for use by shipping operators to identify piracy threats.

The Narwhal Star USV is a highly effective, ocean going Rigid Inflatable Boat (RIB) that improves safety for passengers and crew, whilst safeguarding vessels, cargo and other valuable assets on-board ship.    

The USV is a highly versatile surveillance platform that can be piloted via a remote Ground Control System (GCS), or used as a conventional, manually piloted vessel. The USV has been designed for rapid deployment from a parent vessel and can be launched using a standard davit or cargo crane. 

Jeff Antley, Managing Director at Star International said: 

“We are very excited to announce the launch of the Narwhal Star USV. The vessel meets a growing demand for ocean going unmanned surveillance solutions that can identify piracy threats without endangering crew.

“Our USV solution uses technologies that have been proven in military settings and offers a highly reliable, effective option for shipping operators who are looking for a cost-efficient alternative to fully autonomous or AI driven drone vessels.”

The technology behind the USV is the product of a long-term research and development project between RIB manufacturer Narwhal and UTEK, a specialist in unmanned control systems. Star International has then brought its knowledge of shipping to bear in the development of the Narwhal Star USV, a high-performance vessel that includes a payload specifically developed for surveillance and reconnaissance purposes.   

Capabilities include an operational range of up to 300 nautical miles, a top speed in excess of 50 knots and marine grade day and night vision cameras with a range of up to 35km.

Defensive capabilities on-board also include flare and smoke cannons, laser dazzlers and decoy buoys, meaning the USV is well equipped to evade any hostile vessels it may encounter. 

Despite a global drop in piracy over recent years, the past 12 months has seen a resurgence in attacks on commercial shipping. In the first three months of 2020 alone, the IMB Piracy Reporting Centre recorded a 24% rise in piracy attacks worldwide. 

Western and Eastern coasts of Africa, coastlines around the Indian Ocean, Malaysia and the Philippines are particularly affected, with recent incidents also occurring in the Caribbean and on the Pacific coast of South America.* 

*(IMB Piracy Reporting Centre, International Chamber of Commerce, 2020). 

Find out more about the Narwhal Star USV. 

Liferafts International DiveCo Marine Civils Sealane Maritime Engineering
SubSalve USA Schwer Marine Fittings Hystat Hydraulic Cylinder Manufacturers BP Norse Marine Southbay Marine Services

QuartzGripâ„¢ Fibreglass Marina Decking is a technical, anti-slip alternate to traditional plastic, timber and steel applications

Thursday, 17th September 2020

Our anti-slip marina decking is designed specifically for areas that become hazardous when wet or oily, including floating pontoons, jetties, tidal brows, access bridges, gangways and more. Since their release, our technically advanced composite decking boards have been installed successfully in both coastal and in-land environments, including new-build and refurbishment projects, throughout the UK.

We have tested all our marina decking against BS 7976-2 standards. Its gritted, non-slip surface provides exceptional traction and is proven to deliver effective slip-resistance. The grit-covered surface is also resistant to moss and algae to ensure a low-maintenance finish, unlike wood which requires regular cleaning and repair work.

Our marina decking strips help to ensure a safe environment for customers, employees and the public. They are easy to install and cut to the required size on-site, so you can create an anti-slip surface in a matter of hours – another benefit of GRP decking when compared with conventional plastic, timber and steel applications that, typically, require more installation time.

Liferafts International DiveCo Marine Civils Sealane Maritime Engineering
Seaplant Marine & Offshore Magazine

Join us

Our commercial marine magazine is designed to provide the perfect place for buyers and sellers of marine equipment and services to find each other.  Provide us with your name and address to receive your copy every month and upload your details to our website to be part of the Seaplant marine Business Finder.

add your company